MARIS ECDIS900 Installation Manual
Backup SIS4000-Mk2
GPS1 Ch1, port 8030
GPS2
Gyro Ch2, port 8031
Log Ch3, port 8032
Free Ch4, port 8033
Free Ch5, port 8034
Free Ch6, port 8035
Free Ch7, port 8036
Free Ch8, port 8037
Note the different port numbers!
If the defaults are not changed, the sensors will transmit on the same port, leading to
inaccurate data.
For example, GPS1 and GPS2 transmitting on the same port will give a jumping position on
the ECDIS900.
GENERAL
When installing, keep in mind that every ECDIS900 must be able to run as a standalone unit.
The SIS4000-Mk2 must be installed as a dedicated unit for the computer,
and NOT shared over the ECDIS900 network!
To Next Page
Loading...
