EasyManuals Logo

Simrad SRT User Manual

Simrad SRT
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
| 5
Preface | SRT LAN radar sensor S-band down-mast Service Manual
matched load. If this is not possible, care should be taken. Do not stand in front of an open-
ended waveguide or RF coax cable from which power is being radiated.
¼ Note: Main power is always present on the terminal board unless the main break from the
power distribution panel of the vessel is turned off.
!
Warning: Never look down a waveguide or a RF coax cable from which power
is being radiated.
Warnings
High voltage
Radar equipment includes high voltage that can cause injury or loss of life. Danger exists only
when the units are opened, exposing internal circuits, as when servicing the equipment.
This radar has been carefully designed to protect personnel from possible injury from
high voltages. Although every effort has been made to eliminate danger to personnel,
no responsibility is accepted for any injury or loss of life suffered in connection with this
equipment.
Radio frequency radiation
Harmful effects (particularly to the eyes) may be caused by exposure of any part of the human
body to high power radio frequency radiation.
The system is however designed to always disable the microwave radiation when the antenna
is not rotating.
Conguration Distance 100 W/m2
point (m)
Distance 50 W/m2
point (m)
Distance 10 W/m2
point (m)
30 KW Transceiver
12’ S-band Antenna
-
(inside the antenna)
-
(inside the antenna)
0.4
X-Ray radiation
This radar system does not generate X-ray radiation.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Simrad SRT and is the answer not in the manual?

Simrad SRT Specifications

General IconGeneral
BrandSimrad
ModelSRT
CategoryRadar
LanguageEnglish

Related product manuals