Need help?Do you have a question about the Simrad TP32 and is the answer not in the manual?
Overview of Simrad Tillerpilots and manual.
Details the SimNet system for interconnecting Simrad equipment.
Describes basic operational status and indicators.
Explains manual steering and operation in standby.
Details how to engage and operate the autopilot.
How to make precise course adjustments in autopilot mode.
Facility for automatic tacking and gybing.
Specifics of auto tack/gybe function within Nav mode.
Steering to a waypoint using GPS/chartplotter.
Sailing to apparent wind angle using wind data.
Importance and placement of external compasses for accuracy.
Reconfiguring the unit for port-side mounting.
Accessing calibration settings for response and seastate.
Setting the tiller's response level (1-9).
Enabling a deadband for smoother operation in rough seas.
Automatic compensation for tiller bias and course error.
Physical installation steps and dimensional guidance.
Wiring the Tillerpilot to the vessel's 12V DC supply.
Connecting the Tillerpilot to the SimNet network.
Setting up operation modes for SimNet connectivity.
Connecting the Tillerpilot to NMEA 0183 devices.
Minimizing interference effects on the Tillerpilot.
Calibrating the internal compass for accuracy.
Tips for efficient sailing with the Tillerpilot.
Common issues, causes, and solutions for the Tillerpilot.
Details of NMEA 0183 data sentences used by the Tillerpilot.
List of available spare parts and optional accessories.
Details of various mounting bracket options and extensions.
Physical measurements of the Tillerpilot unit.
Technical specifications of the Tillerpilot models.
Overview of Simrad Tillerpilots and manual.
Details the SimNet system for interconnecting Simrad equipment.
Describes basic operational status and indicators.
Explains manual steering and operation in standby.
Details how to engage and operate the autopilot.
How to make precise course adjustments in autopilot mode.
Facility for automatic tacking and gybing.
Specifics of auto tack/gybe function within Nav mode.
Steering to a waypoint using GPS/chartplotter.
Sailing to apparent wind angle using wind data.
Importance and placement of external compasses for accuracy.
Reconfiguring the unit for port-side mounting.
Accessing calibration settings for response and seastate.
Setting the tiller's response level (1-9).
Enabling a deadband for smoother operation in rough seas.
Automatic compensation for tiller bias and course error.
Physical installation steps and dimensional guidance.
Wiring the Tillerpilot to the vessel's 12V DC supply.
Connecting the Tillerpilot to the SimNet network.
Setting up operation modes for SimNet connectivity.
Connecting the Tillerpilot to NMEA 0183 devices.
Minimizing interference effects on the Tillerpilot.
Calibrating the internal compass for accuracy.
Tips for efficient sailing with the Tillerpilot.
Common issues, causes, and solutions for the Tillerpilot.
Details of NMEA 0183 data sentences used by the Tillerpilot.
List of available spare parts and optional accessories.
Details of various mounting bracket options and extensions.
Physical measurements of the Tillerpilot unit.
Technical specifications of the Tillerpilot models.
General| Brand | Simrad |
|---|---|
| Model | TP32 |
| Category | Marine Equipment |
| Language | English |
To Next Page
