Singer 9134 - Thread the Machine

THREADING THE MACHINE
Your sewing machine is easily threaded. Tension discs, thread guides and take-up
lever have been designed as internal parts, eliminating many extra threading steps° The
clear threading path helps you avoid threading errors.
To thread your machine correctly, simply follow the steps below:
• Raise presser foot lifter:
o Raise needle to its highest position by turning hand wheel toward
you.
o Place spool of thread on spool pin (1).
o Slide spool cap (2) firmly over the rim of the spool to prevent thread
tangling.
o Snap thread into thread guide post (3).
o Following arrows, guide thread into auto tension channel (4) down to needle and
firmly pull thread.
o Thread needle from front to back.
3
\
4
2