CLEANING THE MACHINE
Your machine is designed to give you many years of dependable service. To ensure this
reliability, take a few minutes to keep the machine clean. How often you clean it depends on
how often you use it.
- Using the lint bPush, remove lint or dust
from:
--presser bar
--needle bar
--bobbin case (if there is a lot of lint in this
area, remove the bobbin case for
cleaning)
--machine surface (if necessary, dampen
a soft cloth and use a mild soap to clean
the surface)
• Remove needle plate as instructed and
clean exposed area with a lint brush°
l
BEFORE STORING YOUR MACHINE
• To disconnect, turn all controls to off ("0")
position, then remove plug from outlet°
° Unplug foot controller from machine.
° Lower presser foot lifter
° Turn handwheel to lower needle bar to
the lowest position
° Place your machine out of reach of
children in safe, dry location.
4o
To Next Page
Loading...
