RAISING THE BOBBIN THREAD
Once the needle has been threaded and the bobbin placed in the bobbin case, the bobbin
thread must be brought up through the hole in the needle plate.,
1. Hold needle thread with left hand.
- Turn hand wheel slowly toward you,
lowering needle into hole in plate,,
i
2. Continue to do this until needle rises
above needle plate.
e Pull gently on needle thread and bring
up bobbin thread in a loop.
Eli'" _ _
16
3,, Open loop with fingers to find end of
bobbin thread°
4. Draw needle thread through left side
opening in presser foot°
° Pull both threads to back of machine,,
To Next Page
Loading...
