Skipper EML224 - Page 61

Date: 2017-01-12
Page 61 of 68
OpInMan EML224/DL1 Compact Speed Log System
Electronics AS
Error
codes
Failure
message
What it means What to do
1 Can not open
SPI
The internal
communications are
not giving the expected
response
Restart
100 Can not open
com 0 (NMEA)
Com port is having
problems initialising
Restart
Disconnect the
inputs and restart,
check baudrates
101 Com 0 NMEA
failure
The port is busy Restart
Disconnect the
inputs and restart,
check baudrates
103 Com message
too long
Check the input strings
are correct
Restart
150-158 Self diagnostic
errors
Self tests not working Run through the
individual self tests
and nd out which
part is not working.
2 Sensor com
failure
Com port is busy Restart
Disconnect the
inputs and restart,
check baudrates
200 Can not open
com 1 (sensor)
Com port is having
problems initialising
Restart
Disconnect the
inputs and restart,
check baudrates
201 USART initialise
failure com 1
The port is busy,
restart.
Disconnect the
inputs and restart,
check baudrates
211 Can not transmit
on Com 1
Com port is having
problems initialising
212, 252 Can not transmit
on com 1
3 Security can not
save
Problem with security
settings / options