Skipper EML224 - Page 62

OpInMan EML224/DL1 Compact Speed Log System
Page 62 of 68
Date: 2017-01-12
Electronics AS
Error
codes
Failure
message
What it means What to do
31 Security save
failed
Could not save
the new security
settings
32 Error table
conrmation
failed – port not
replying
Can not save the error
log.
Flash memory failure
Check soldering
on components
on rear of the
processor board in
the CD401 unit.
4 Cong retrieve
failed
Could not read the
last cong settings,
defaults will be used
Cal will be wrong
40 SSC lost coms The Communication
between the screen/
keyboard and
processor is not
performing correctly.
Buttons may not
work, and the
screen may not
update. Check
activity dot.
Reboot. Check
cables and circuit
boards in CD401
unit.
41 DMA write
overow
Data coming too fast?
42 Cong
conrmation
failed
Could not write the
new cong – Probably
ash memory problem
Try diagnostics
test nr 1. Check
soldering of ash
chip on rear of
processor board of
CD401 unit.
5 Boot retrieve
failed
Could not nd the boot
information – probably
a memory failure
Restart.
52 Boot cong
conrmation
failed