User Account Types
Main User
The main user is a registered user with activated
ŠKODA Connect online services and a vehicle as-
signed to his/her account.
The main user has full control over the settings and
operation of the vehicle.
User with a ŠKODA Connect online account
The user has his/her own ŠKODA Connect online ac-
count.
Guest
The guest account is anonymous.
Conditions
In order to manage the user accounts online, the fol-
lowing conditions must be met.
✓ A main user with active ŠKODA Connect online
services is registered in Infotainment.
✓ The vehicle is within range of a contractual mo-
bile network.
In areas where this is insucient signal, e.g. in un-
derground garages, functionality may be limited.
Operation
Introductory log on screen
When the ignition and the Infotainment are switched
on, the log on screen for logging in to the user ac-
count is displayed.
The log on screen cannot be skipped. It is neces-
sary to log in to one of the user accounts, otherwise
the Infotainment will be disabled.
Some user accounts can be protected. Protected ac-
counts are shown in the user list with the icon
.
To log in to the protected user account you need the
S-PIN created when creating the user account on
the ŠKODA Connect Portal website, in the ŠKODA
Connect application or when registering the user in
infotainment.
›
If you do not want to enter the S PIN next time,
please select the
Remember S-PIN
option.
Verification
of the user by entering the S-PIN can
be switched o/on in the
Protect user profile
Protect user profile
menu item.
›
To register another user, tap on
Change user
.
A menu with available users and the option to enter a
new user will be displayed.
Final logout screen
When the ignition is switched o, the logout screen
is displayed. If the user account currently in use is
not protected by the S-PIN, the user is automatically
logged out.
If the user account is protected by the S-PIN, the fol-
lowing menu is displayed.
▶
OK
- after switching on the ignition again within 30
minutes, no registration for the protected user ac-
count using the S-PIN is necessary.
▶
Log out
- after switching on the ignition, the S-PIN is
required to log in to the protected user account.
Settings
Delete user
›
To display the user accounts , tap
De-
lete users
.
›
To delete the user, select the user and confirm the
deletion.
Deleting the main user account will delete the
shared user accounts.
Delete the current user account
›
Tap
Delete user profile
and confirm the de-
letion.
User management
›
Tap on .
Details of the currently selected user
▶
- A user account protected by the S-PIN
Change to another user / input data for a new user
Settings
104
Infotainment Amundsen › User management
To Next Page
Loading...
Need help?
General
