Removing
›
Unhook the straps.
›
Remove the cover.
Inserting
›
Insert the cover until it clicks into place.
›
Hook in the retaining straps.
Store the cover behind the rear seats
›
Hook the cover behind
the rear seats.
Variable loading floor in the boot
Setting the position
The maximum load of the variable loading floor is
75 kg.
Set the variable loading floor to the upper or lower
position
›
Lift the variable load
floor and pull it to-
wards you.
›
To set in the upper po-
sition, position the vari-
able loading floor in the
front area on area A .
›
To set in the lower po-
sition, position the vari-
able loading floor in the
front area on space
B .
›
Press the variable load-
ing floor forward and
hang up.
Fasten the raised variable loading floor in the up-
per position
›
Secure the raised vari-
able loading floor with
the help of hinged cor-
ners in areas A .
Removing and inserting
›
Lift the variable loading floor up to a distance of
about 15 cm below the luggage compartment cov-
er and then remove it.
›
Insertion takes place in reverse order.
164
Storage space and interior equipment › Variable loading floor in the boot
To Next Page
Loading...
Need help?
General
