Risk of collision in a speed range of 30-60 km/h
The system warns of a collision hazard first. If the
driver does not respond, the vehicle is automatically
braked.
Operating conditions
✓ Front Assist activated.
✓ Driving speed between 5-60 km/h.
Speed limiter
Functionality
The speed limiter controls the maximum driving
speed according to the set speed limit.
If the limit is exceeded when driving downhill, brake
the vehicle with the brake pedal.
Status display in the instrument cluster display
illuminated - the cruise control is activated.
When the control starts, is highlighted and the
set limit is displayed.
illuminated - cruise control is active
flashing - the set limit is exceeded
Operating conditions
✓ The driving speed is higher than 30 km/h.
Operation
Variant without GRA
A
Activate limiter (control inactive)
Deactivate limiter
Interrupt control (sprung position)
B
Resume control
1)
/Increase limit
C
Start control with current speed/Reduce
limit
Variant with GRA
A
Activate GRA (condition for the subsequent
activation of the limiter).
To activate the speed limiter, press button D
or
E
.
Deactivate limiter
Interrupt control (sprung position)
B
Resume control
1)
/Increase limit
C
Start control with current speed/Reduce
limit
D
Depending on the equipment:
Switch between GRA and speed limiter
Or:
Show menu of assist systems - Possibility of
switching between GRA and speed limiter
Switching to GRA interrupts the control.
E
Show menu of assist systems - Possibility of
switching between GRA and speed limiter
Switching to GRA interrupts the control.
Adjusting the speed limit with the buttons
B and
C
By pressing in steps of 1 km/h.
By holding in steps of 10 km/h.
1)
If no speed limit is set, the current speed is set as the speed limit.
129
Driver assist systems › Speed limiter
To Next Page
Loading...
Need help?
General
