Lighting, windscreen wipers and
washers
Exterior lighting
Functionality
Unless otherwise stated, the light works when the
ignition is switched on.
Daylight running lights
The daytime running lights illuminate the area in
front of the vehicle.
For vehicles for certain markets, they also illumi-
nate the rear vehicle area.
Operating conditions
✓
The lights switch is in position , or .
Switching the low beam on/o automatically
The low beam is automatically switched on or o de-
pending on the lighting conditions.
Operating conditions
✓
The light switch is in the
position.
The automatic headlight circuit is indicated by the il-
lumination of the symbol in the light switch.
Switching low beam on/o automatically in rain
Operating conditions
✓
The light switch is in the position.
✓ The function is activated.
✓ The windscreen wipers are switched on for lon-
ger than 30 seconds.
The automatic headlight circuit is indicated by the il-
lumination of the
symbol in the light switch.
Full LED headlights
When the light switch is in position , the head-
lights provide the best possible beam of light in front
of the vehicle.
CORNER function
The CORNER function is intended for turning or ma-
noeuvring (e.g. when parking).
The function illuminates the vicinity of the vehicle
front in the direction of travel.
Operating conditions
✓ The turn signal is switched on or the front wheels
are steered sharply.
✓ The low beam is switched on.
✓ The fog lights are not switched on.
✓ The driving speed is lower than 40 km/h.
When no light is switched on
The symbol
in the light switch may also light up in
the instrument cluster, indicating that it is necessary
to switch on the light.
illuminates
›
Switch on the light.
Operation
Switching o the
lights except the
daytime running
lights
Switching the low
beam on/o auto-
matically
Switching on the
parking lights
Switching on the low
beam
As the basic position of the light switch, use posi-
tion .
Main beam
The high beam works when the low beam is on.
A
Switch on the high
beam - the warning
light in the instru-
ment cluster illumi-
nates
B
Switch o the high
beam - in the instru-
ment cluster, the in-
dicator light goes out.
Switch on the head-
light flasher - the warning light is illuminated
CAUTION
Risk of an accident!
▶
Do not dazzle other road users with the high beam.
Turn signal
A
Switching on the in-
dicator light on the
right - the warning
light flashes in the
instrument cluster
B
Switching on the in-
dicator light on the
left - the warning
light flashes in the
instrument cluster
Turn signal - convenience signalling
Convenience signalling enables three flashes of the
turn signal lights without having to move the lever
up or down.
›
Tap the control lever up or down.
The corresponding turn signal lights flash three
times.
Tap the lever in the opposite direction ahead of
time to stop signalling.
42
Lighting, windscreen wipers and washers › Exterior lighting
To Next Page
Loading...
Need help?
General
