Rear headrests
›
Move the headrest in
the desired direction.
When pushing down,
press and hold the
safety button.
Removing and inserting the rear headrests
Removing
›
Partially fold the re-
spective seat back for-
wards.
›
Move the headrest up
to the stop.
›
Press safety buttons
A
and
B
at the same
time and remove the
support.
Inserting
›
Insert the headrest into the seat backrest.
The safety button must click into place.
Front armrest
Settings
›
Move the backrest to
the desired position.
Rear armrest
Settings
›
Fold down the armrest.
The folded-down arm-
rest can be used as a
storage table.
Seat heating
What you should be mindful of
WARNING
Risk of burns!
▶
Do not switch on the seat heater for persons with
limited perception of pain or temperature.
NOTICE
Risk of seat damage!
▶
Do not kneel on the seats or otherwise puncture
them.
▶
Do not turn on the heater in the following situa-
tions.
▶
The seat is not occupied.
▶
There are objects on the seat, such as a child
seat.
▶
There are additional seat covers or protective
covers on the seat.
Conditions
✓ The engine is running.
Operation
›
Press the or key to switch on the seat heating.
The seat heating is switched on with maximum heat-
ing output. By repeatedly pressing the button, the
heating output is reduced until it is switched o.
The heat output is determined by the number of illu-
minated indicator lights that are shown in the key or
in the Climatronic display.
If the seat heating is switched on with maximum
heat output, the heating power is automatically low-
ered after 10 minutes.
32
Seats, steering wheel and mirror › Front armrest
To Next Page
Loading...
Need help?
General
