To Next Page

To Previous Page

›

Change the bulb in the

socket.

›

Insert the socket with

the light bulb into the

headlight and turn it

clockwise to secure.

›

Insert the cover cap in-

to the wheel arch and

turn it clockwise to

secure.

Fog lights

›

Release the cover with

the bracket from the

tool kit and remove it.

›

Unscrew the screws

›

Remove the light.

›

Release the connector

and remove it from the

bulb.

›

Turn the bulb and re-

move it.

›

Insert the new bulb in-

to the light so that the

guide lugs on the bulb

are aligned with the

corresponding open-

ings in the light.

›

Turn the bulb clock-

wise

to secure.

›

Attach the connector to the bulb, ensuring it clicks

into place.

›

Insert the light again and tighten.

›

First insert the cover in the outer bumper area.

›

Press the cover in towards the centre of the

bumper until it clicks into place.

Rear turn signal

›

Remove the cover with

the bracket from the

tool kit.

›

Unscrew the screws

A and remove the

light.

›

Press the lock mecha-

nisms on the connec-

tor and remove the

connector.

›

Turn and remove the

socket with the bulb.

Lighting, windscreen wipers and washers › Replace light bulbs

Brand	Skoda
Model	Scala 2019
Category	Automobile
Language	English

Skoda Scala 2019 User Manual

Table of Contents

Questions and Answers:

Skoda Scala 2019 Specifications

Related product manuals