4 Press [Yellow] key will open dialog box asking you 1 In “LNB Power”, there are two options, “On” and
whether confirm to delete current TP. When select “Off”, for your selection. If the setting is “On”, the
“Yes”, you will delete the channel which highlight focus receiver will supply power to satellite antenna. If
on. When select “No”, it will cancel the operation. the setting is “Off”, the receiver won’t supply
5 Press [Blue] key will display a dialogue box. You can select
“FTA Only, Scan Channel, Network Search” items, then move
highlight to “Yes” button and press [OK] to begin to search.
1 Press [Up/Down] key to select menu pages
4.7 Other among Edit Channel, Installation, System Setup,
Tools ,Ethernet and Multimedia.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
To Next Page