Skyjack SJ-7027 - Maximum Platform Capacities (600 Series)(Evenly Distributed); Tire Specifications

SECTION 2, Page 13
SJ-600 Series Engine Powered
June 2001
Table 2-1. Owner’s Annual Inspection Record
Table 2-3. Maximum Platform Capacities (600 Series)(Evenly Distributed)
NOTE: Occupants AND materials are not to exceed rated load.
Capacities listed are for standard machines equipped with #6 pneumatic tires.
Refer to capacity label at sides of platform for additional information.
MODEL NUMBER________________________________ SERIAL NUMBER________________________
RECORDING
DATE
RECORDING
YEAR #
1 2 3 4 5 6 7 8
OWNER’S
NAME
INSPECTED
BY
Main
Platform
First
Extension
Second
Extension
MODEL
Capacity
Number Of
Occupants
Capacity
Number Of
Occupants
Capacity
Number Of
Occupants
Total
Platform
Capacity
No extension
Platform
1500 lbs.
(680 kg)
5 - - - -
1500 lbs.
(680 kg)
7027
One Extension
Platform
1000 lbs.
(454 kg)
3
500 lbs.
(227 kg)
2 - -
1500 lbs.
(680 kg)
Table 2-2. Tire Specifications
WARNING
Air Pressure Can Affect Stability. Temperature Changes Can Affect Air Pressure. It Is Important To
Check Tire Pressures Prior To Use On A Daily Basis In The Operating Conditions Experienced By End
User. If The Measured PSI Reading Is Less Than The Specification And Tolerance, Re-inflate To The
Proper Specification Within The Tolerance Range Specified. Tires Shall Also Not Be Subject To Over-
Inflation Above The Recommended Specification And Tolerance Range.
Tire* Fill Specification
Pressure
Psi (kPa)
Size Fill Type Ply Rating
Factory
Listed Sidewall
Maximum
#6 30-10-16.5 NHS 8 50 (344.7)* 65 (448.2)
#6 32.3-10-16.5 HD Stabilizer 10 70 (482.6)* 75 (517.1)
#6 30-10-16.5 OTR Outrigger 10 70 (482.6)* 75 (517.1)
#7 31-15.5-15 NHS 8 50 (344.7)* Not Available
#8 31-13.5-15 NHS
Air
Consult Skyjack Inc.
#6F 30-10-16.5 NHS 8 **
#7F 31-15.5-15 NHS 8 **
#8F 31-13.5-15 NHS
Solid
Urethane
Consult Skyjack Inc.
*
**
Factory preset @ 20°C, Check pressures regularly as tires can lose pressure over time and over different
ambient temperatures even under normal conditions.
Urethane used for filling #6F and #7F tires MUST be 50-55 durometer.