Page iii
SJ600 Series Engine Powered
June 2001
SERVICE POLICY AND WARRANTY
SKYJACK, Inc. warrants each new work platform to be free of defective parts and workmanship during the first
12 months. Refer to Warranty Statement on Page iv for details.
NOTE
SKYJACK, Inc. is continuously improving and expanding product features on it’s equipment: therefore,
specifications and dimensions are subject to change without notice.
This Safety Alert Symbol Means Attention!
Become Alert! Your Safety Is Involved.
The Safety Alert Symbol identifies important safety messages on machines, safety signs, in manuals, or else-
where. When you see this symbol, be alert to the possibility of personal injury or death. Follow the instructions
in the safety message.
SCOPE OF THIS MANUAL
This manual applies to the ANSI/SIA, CSA and CE versions of the SJ-600 Series work platform models listed in
Table 1-1. Equipment identified with “ANSI/SIA” meet the ANSI/SIA-A92.6 -1990 or ANSI/SIA-A92.6 -1999 standards.
Equipment identified with “CSA” meets the CAN3-B354.2 & .3-M82 standards. Equipment identified with “CE”
meets the requirements for the European countries, i.e. Machinery Directive 89/392/EEC and EMC Directive 89/
336/EEC and the corresponding EN standards.
DO NOT OPERATE THIS EQUIPMENT WITHOUT PROPER
AUTHORIZATION AND TRAINING. DEATH OR SERIOUS
INJURY COULD RESULT FROM IMPROPER USE OF THIS
EQUIPMENT!
To Next Page
Loading...
Need help?
General
