April 2006
SKYJACK, Page 22
Section 2 - Operation
Component Identification (Special Options)
SJ800 - E Series
Battery Powered
2.3 Component Identification (Special Options)
This following descriptions are for identification, explana-
tion and locating purposes only of optional equipment.
2.3-1 Outrigger Controls (Auto-levelling)
(If Equipped)
The outrigger controls are located next to the operator’s
control box. These switches control each outriggers’ ex-
tension and retraction.
Figure 2-12. Outrigger Controls
with All Options on Auxiliary Control Box Console
1. Outrigger UP/DOWN Control Toggle Switches -
These switches control the extension and retraction
of each individual outrigger.
2. Auto-Level Toggle Switch - When this switch is in
the “DOWN”
position, each outrigger extends and
automatically adjusts until the machine is level. When
the toggle switch is in the “UP” position the outriggers
retract.
3. Outrigger Enable Toggle Switch - This toggle
switch, when in the “UP” or “DOWN” position,
provides outrigger power needed in order to activate
the auto-level toggle switch functions.
4. Auto Level Indicator Light - This light functions
when the auto and manual level functions are in use
and illuminates to display the status of the auto-
leveling outriggers. The indicator light has the
following states:
OFF: The outriggers are fully retracted.
FLASHING RAPIDLY: The outriggers are
extending but the platform is not level.
FLASHING: The outriggers are extended but
the platform is not yet level.
SOLID: The outriggers are extended and the
platform is level.
2.3-2 Powered Extension Deck Control Box
(If Equipped)
This metal control box is mounted on the extension
platform guardrail. It contains the following controls:
Figure 2-13. Powered Extension
Deck Control Box
1. Enable Switch - This switch, when activated and
held allows the extension deck extend/retract
switch functions to operate.
2. EXTEND/RETRACT Switch - This switch, when
activated, extends or retracts the powered
extension deck. Refer to Section 2.5-10 on how
to extend/retract a powered extension deck.
2
1
1
2
3
4
To Next Page
Loading...
