April 2006
SKYJACK, Page 8
Section 1 - About Your Aerial Platform
SJ800 - E Series
Battery Powered
1.8 Tilt Sensing System
The tilt sensing system, located on the base of the aerial
platform, is designed to prevent lifting or driving when
the machine is on a slope greater than a predetermined
limit. If in this situation, the platform must be fully lowered
immediately.
1.9 Load Sensing System
The load sensing system is a safety device that prevents
any normal movement of the aerial platform from a
stationary working condition after the rated load is
reached and exceeded.
1.10 Lowering Warning System
A lowering warning system automatically stops the low-
ering function before reaching the fully retracted posi-
tion and sounds the alarm.
1.11 Serial Number Nameplate
The serial number nameplate, located at the rear of the
machine, lists the following:
• Model number
• Serial number
• Machine weight
• Maximum drivable height
• Maximum capacities
• Maximum number of persons permissible on the
platform
• Voltage
• System pressure
• Lift pressure
• Maximum platform height
• Maximum wheel load
Use this information for proper operation and mainte-
nance and when ordering service parts.
To Next Page
Loading...
