EasyManua.ls Logo

Skyjack SJ800-E series - Driving

Skyjack SJ800-E series
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SKYJACK, Page 33
April 2006
Loading/Unloading Section 2 - Operation
SJ800 - E Series
Battery Powered
Note
The aerial platform can be lifted with a forklift from the sides but Skyjack does not recommend this use. Lift with
forks in designated pockets as illustrated in Figure 2-18.
Figure 2-18. Forklift Pockets
2.6-2 Driving
When driving the aerial platform:
Ramp or dock capacity should be sufficient to withstand maximum machine weight.
Ramp should be equipped with side guards to prevent inadvertent fall from the ramp.
Incline should not exceed machine gradeability (refer to Table 2-1).
Aerial platform brakes should be checked for proper operation.
Aerial platform speed should be on high torque setting.
Warning
When transporting, the aerial platform must be secured to the truck or trailer deck. Tie downs are available as
illustrated in Figure 2-16.
Forklift Pocket Forklift Pocket

Table of Contents

Related product manuals