SJ82 T, SJ86 T 213205AAA
33
Optional equipment and attachments Section 3 – Familiarization
3.5 Optional equipment and
attachments
CAUTION
Skyjack approved modications and attachments
can change the MEWP specications. Refer to the
applicable instructions and labels.
IMPORTANT
Refer to the labels of the optional equipment for
the actual weight. Include this weight to calculate
the total load on the platform. Include personnel
and other materials in the total load.
The weight of the attached parts, panels,
occupants, and tools put together must not be
more than the rated platform capacity.
NOTE
Refer to the website (www.skyjack.com) for other
optional equipment.
3.5-1 Flashing amber light
The ashing amber light is on top of the turret of the
MEWP.
1
7
1
Flashing amber light: This light ashes when
you operate a boom function. It operates with the
motion alarm.
3.5-2 Welder
The welder is installed on the platform. Refer to the
welder operation manual for the correct operation and
maintenance.
1
2
7
1
Welder: This equipment is connected to the
welder AC socket on the platform.
7
2
Welder AC socket: This AC socket is for the
welder.
NOTE
In temperatures below 0°C (32°F), make the
hydraulic oil warm before you operate the welder.
WARNING
Only a qualied service technician must install,
operate, do maintenance on, and repair the welder.
CAUTION
If you breathe in welding fumes and gases, it can
be hazardous to your health.
FAMILIARIZATION
To Next Page
Loading...
Need help?
General
