Skyjack SJ82 T User Manual

SJ82 T, SJ86 T 213205AAA
41
Visual and daily maintenance inspections Section 4 – Inspections Before Operation
4.2-6 Control compartment
Do the inspection that follows:
Make sure all compartment latches are latched tightly
and in good condition.
1
Base control console
▪
Make sure there are no loose or missing parts.
▪
Make sure there is no visible damage, and all
the switches are in their off/neutral positions.
2
Hydraulic tank
▪
Make sure the hydraulic ller cap closes
tightly.
▪
Make sure there is no visible damage or
hydraulic leaks.
Hydraulic oil level:
▪
Make sure the boom is in the stowed position.
▪
Do a check on the gauge on the side of the
hydraulic oil tank. The hydraulic oil level must
be at or a small distance above the top mark
of the gauge. Add oil if it is necessary. Refer to
the service manual for the recommended oil
type.
3
Hydraulic return lter
▪
Make sure the lter element is attached and
tight.
▪
Make sure there is no visible damage or
hydraulic leaks.
4
High-pressure lter
▪
Make sure the housing is attached and tight.
▪
Make sure there is no visible damage or
hydraulic leaks.
5
Manifolds
▪
Make sure all ttings and hoses are correctly
tightened.
▪
Make sure there is no indication of hydraulic
leakage.
▪
Make sure there are no loose wires or missing
fasteners.
6
Emergency-power unit
▪
Make sure there are no loose or missing parts.
▪
Make sure there are no loose wires or missing
fasteners.
▪
Make sure there is no visible damage.
▪
Make sure all the ttings and hoses are
correctly tightened and there are no hydraulic
leaks.
1
42 3
65

Skyjack SJ82 T Specifications

General

Brand	Skyjack
Model	SJ82 T
Category	Boom Lifts
Language	English