Skyjack SJ82 T User Manual

213205AAA SJ82 T, SJ86 T
44
Section 4 – Inspections Before Operation Visual and daily maintenance inspections
6
Wheel/Tire assembly
▪
Do a check on all tire treads and sidewalls for
cuts, cracks, holes, and unusual wear.
▪
Do a check on each wheel for damage, and
cracked welds.
▪
Do a check on each lug nut for the correct
torque to make sure they are not loose.
▪
Make sure the wheels are correctly aligned
vertically and horizontally.
▪
Make sure there are no loose or missing parts.
▪
Make sure there is no visible damage.
Refer to Section 7.6 for wheel/tire specications.
WARNING
Do not use tires other than the tires that Skyjack
species for this MEWP. Do not mix different types
of tires or use tires that are not in good condition.
Only replace the tires with the same types that are
approved by Skyjack. The use of other tires can
make the MEWP less stable. If you do not obey,
there is a risk of death or serious injury.
7
Turret rotation gear
▪
Make sure there are no loose or missing parts.
▪
Make sure there is no visible damage.
8
Rotary manifold
▪
Make sure all hoses are correctly tightened
and there is no sign of hydraulic leakage.
8
6
7

Skyjack SJ82 T Specifications

General

Brand	Skyjack
Model	SJ82 T
Category	Boom Lifts
Language	English