SJ82 T, SJ86 T 213205AAA
61
Operator’s checklist Section 4 – Inspections Before Operation
P N/A Comment (if item does not pass inspection)
Visual and Daily Maintenance Inspections
Platform assembly - Do an inspection for loose, damaged, or missing
components
MEWP oor
AC power socket
Platform control console
Manual storage box
Boom assembly - Do an inspection for loose, damaged, or missing
components
Load cell
Rotary actuator
Jib
Cable track
Cylinders
Wear pads
Boom
Hoses
Wire ropes
Optional equipment and attachments - Do an inspection for leaks and
loose, damaged, or missing components
Function Tests
Do a test of the main power disconnect switch
Base control console
Do a test of the emergency-stop button and emergency-stop light on the
base
Do a test of the start/function enable/emergency power switch and all the
boom and platform functions
Do a test of the platform self-leveling
Do a test of the platform capacity zone indicator lights
Do a test of the emergency power unit
Do a test of the off/base/platform switch
Do a test of the positive-air shutoff switch
Platform control console
Do a test of the emergency-stop button and emergency-stop light on the
platform
Do a test of the control module and load sensing module self-check
Do a test of the footswitch and all the boom and platform functions
Do a test of the boom lowering cutout switch
Do a test of the platform capacity zone indicator lights
Do a test of the wire ropes
Do a test of the secondary guarding electrical (SGE)
Do a test of the engine start/on/off switch
Do a test of the emergency power unit
Do a test of the manual platform-leveling
Do a test of the steer function
Do a test of the drive function
Do a test of the brakes
Do a test of the horn
Do a test of the elevated travel speed
Do a test of the differential lock switch
Do a test of the EcoStart
Do a test of the oscillating cylinders
Operator’s checklist
NOTE: Make a copy of this page or go to www.skyjack.com for a copy that you can print.
(page 2 of 2)
To Next Page
Loading...
Need help?
General
