EasyManua.ls Logo

Skytrac CDP-300 - 4 Menu Operation; Quick Mail

Default Icon
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CDP-300 User’s Guide
Document Rev. 01.008 DOC0500 Page 13 of 42
Restricted Proprietary and Confidential Information
4 MENU OPERATION
The CDP menu is organized into the following categories of functionality (those shown in italics below will only be
displayed if there is data/information to view):
Quick Mail
Inbox
Email
System
Emergency Mode (Only on CDP-300. This function is provided by pushbutton or toggle switch on the DVI-
300)
Display Alerts
Phone
Below options require appropriate firmware installed.
Rendezvous (RV) List
Posn Interval (PI)
Compose SMS
Quick Voice Msg
Voice Message
Details for these functions are below.
4.1 QUICK MAIL
Main Menu Quick Mail
The Quick Mail menu allows the user to send pre-programmed emails. The maximum number supported is 99.
The Quick Mails can be programmed in the SkyWeb application.
To send a Quick Mail Message, select the Quick mail option, then use the arrow keys to select the desired Quick
Mail Message followed by pressing the Enter key. If combined with a DVI, the DVI Send’ key can be used for
“express send” to the predefined default address.(When scrolling thru the quick mails, the right arrow key can
be used to scroll 10 messages at a time. The left arrow key will return the user to the Main Menu).
The user is then prompted to select the message recipient, and either
1. Send the Quick Mail to the default address (as saved in the Quick Mail Message), or
UNCONTROLLED COPY IF PRINTED

Related product manuals