CDP-300 User’s Guide
Document Rev. 01.008 DOC0500 Page 27 of 42
Restricted Proprietary and Confidential Information
In the Address Book the number the user wishes to call can be selected by scrolling the Address book entries.
Use the▲, ▼ keys to scroll by one, or ► key to scroll forward by 10, then press the ◙ Key to select the
name/number to be called.
Address Book entries are created using the SkyWeb application. Please see the user’s SkyWeb Program
Manager or their designate to get these entered.
4.7.4 REDIAL
Main Menu Phone Redial
Selecting the Redial option will place a call to the last number dialled. If there is no last number stored, the Redial
option will not be available. The last number dialled (redial number) is erased when the CDP-300 restarts (is
powered off / on).
With the CDP/DVI redial can also be achieved by pressing “0” followed by ‘Send’ or ◙ key
4.7.5 INCOMING CALL
To call the ISAT from the ground, the user must dial an international number. The Iridium Satellite network is
considered an international number, regardless of where the call is placed from, the country code is either 8816 or
8817. To dial an international number, dial the International Direct Dialling (IDD) prefix of the country being called
from (011 for Canada and the US) then the destination country code (8816 or 8817), followed by the ISAT’s
number.
Example: 011 8816 3101 0616
When a call comes in to the ISAT, the CDP-300 Display will show a message indicating an incoming call, and an
audible ring will be heard on the headset. If the caller ID is available the number will be displayed in the incoming
call advisory screen. If installed, the optional external buzzer will also sound briefly.
To answer the call, press the ◙ Enter key. When the call is answered the display will update the current status of
the call and the Audio Control options will be displayed (see Section 4.7.6).
When finished, press the Enter key again to hang up. If the ground user hangs up, it may take the Iridium system
a few moments to terminate the call, before the ISAT will automatically end the call, then return to the previously
active menu.
It may take several attempts to connect a satellite phone call via the Iridium network when dialling to the ISAT
from the ground. If the first attempt fails, try again.
UNCONTROLLED COPY IF PRINTED
To Next Page
Loading...