CDP-300 User’s Guide
Document Rev. 01.008 DOC0500 Page 21 of 42
Restricted Proprietary and Confidential Information
There are seven menu options available from the System Setup menu:
Diagnostics
Audio Setup
Data Reset Menu
ISAT Info (only available when communication with ISAT is normal)
CDP Info
DVI Info (Not available in the CDP-300 mode)
Set Mailbox Num
4.4.3.1 DIAGNOSTICS
The Diagnostics menu has several options to perform tests.
Run All Tests (All tests below in sequence)
Display Test
Keypad Test
Indicator Test
Buzzer Test
4.4.3.2 AUDIO SETUP
The user can select from each of the following audio options (the values available are those shown in brackets
after each option) and make changes as required:
Choose Ringtone (6 tones to choose from)
Mic DC Bias (On/Off)
ISAT Audio Input (Lo/Hi Level)
Mic Input Gain (6dB/18dB Gain for the ISAT-200R, 1-10 for the ISAT-200A)
Ringer Volume (From 1-10)
ISAT Record Input (Lo/Hi Level, ISAT200A only)
4.4.3.3 DATA RESET MENU
The Data Reset menu allows the user to clear and reset Quick Mails, Address Book entries, emails or the Redial.
The user also has the option to clear all data and reset the system to factory defaults via the ‘Factory Reset’
option.
When the CDP-300 is Factory Reset, all the Address Book entries are erased, the Quick Mails are cleared and
initialized to default and the mailbox number is set to 0. The email Inbox, Outbox, and Sentbox are cleared and
Brightness configuration items are set to factory default values.
UNCONTROLLED COPY IF PRINTED
To Next Page
Loading...