SLE 350 - Replacement of Filter in the Pressure Regulator

Page 25 of 42
• Replace filter (1), re-fit the holder of filter.
• Replace the cover of filter and secure it by turning to
right till locked.
8.8 Replacement of filter in the pressure regulator
Prior the intervention to the appliance it is necessary to decrease the
pressure of air in air chamber to zero and to disconnect the appliance from
mains.
• Unscrew the cover of filter and pull it out.
• Unscrew the holder of filter.
• Replace filter, screw the holder of filter.
• Release the condensed liquid from the water trap.
• Screw the cover of filter.
1