Page 31 of 42
10.1 Fixing of compressor before transportation.
Before transportation it is required to fix the compressor to prevent movement.
Procedure is illustrated on the images.
• Remove the front and back covers unscrewing screws on the side of the
cabinet, disconnect the ground connector on the covers.
• Disassembly the internal back cover unscrewing four screws.
• Remove the evaporative tray under the air pump.
• Insert fixing elements under and above the air pump.
•Assembly the internal back cover, connect the ground connector on the
covers, insert the covers and filter.
10.2 Climatic conditions for storage and transport
Temperature –25°C to +55°C, 24 hrs +70°C
Relative air humidity 10% to 90% (no condensation)
Relative air humidity for seaworthy packing 10% to 100% (included
condensation)
10.3 Storage
If the compressor is not going to be used for a long period of time, it is
recommended that the appliance be disconnected from the mains supply and the
air pressure in the air chamber be released.
11. Disposal of the appliance
• Disconnect the appliance from the mains supply.
• Release the air pressure in pressure tank
• Dispose of the appliance according to local valid regulations.
• The parts used in this product, when disposed, do not have negative impact on
the environment.
To Next Page
Loading...