Page 30 of 42
9.1 Replacement of the bearing:
• Strip the bearing with appliance.
• Press the new bearing on piston pin.
10. Storage and transport conditions
The compressor is dispatched from the factory in transport packing with the pump
fixed. Thus the appliance is protected from damage during transport.
During transport, if it is possible, always use the original packaging of the
compressor. Always transport the compressor up-right.
During transport and storage, protect the compressor against humidity,
contamination and extreme temperatures.
Compressors that have original packaging can be stored in warm, dry and dust-free
areas.
Keep the packaging material, if possible. If it is not possible, dispose of the
packaging material in an environment-friendly way.
The compressor can only be transported pressure-free. It is necessary to
release the pressure from the pressure tank and pressure hoses prior to
transport, and to release any possible condensate.
To Next Page
Loading...