SLE SLE4000 - Page 184

Page 184 (Model K)
Monitor Pressure Button: Toggles between waveforms, diagnostic use only
Mute button: Mutes a mutable alarm for 1 minute.
Next button: Activates next panel
Night and screen lock button: Activates night mode for LCD
ON/OFF button: Toggles function state between on and off
Options and service data
button:
Activates calibration options panel
Oxygen alarm test button: Activates Oxygen Alarm testing panel
Oxygen button: Activates oxygen sensor calibration panel
P Max button: Selects maximum pressure against time display
P Mean button: Selects mean pressure against time display
P Min button: Selects minimum pressure against time display
Pause/Play button: Freezes & unfreezes waveform display (60 secs max)
PEEP parameter control: 0 to 20 mbar (Resolution 1mbar)
PIP parameter control: 0 to 65 mbar (Resolution 1mbar)
Picture capture button: Stores loop to memory
PSV button: Selects PSV mode
PSV Setup: button: Activates pressure support panel
PTV button: Selects PTV mode
Reset button: Resets current alarm
Reset contamination alarm
button:
Resets the alarm
Resistance Trend Button Selects resistance against time display
Return button: Returns to previous panel
Select button: Tabs between time and date values
Set time and date button: Activates time and date panel
Set trigger button: Activate the breath detection threshold
SIMV button: Selects SIMV mode
Standby button: Sets ventilator into 90 second standby mode
Stored loop button: Displays stored loops
Ti parameter: control: 0.1 to 3 seconds (Resolution 0.01 seconds)
Tid Vol button: Selects tidal volume against time display
Tidal vol parameter: control: 2 to 200 ml
From 2ml to 6ml the parameter increments in 0.2ml steps (Fine resolution).
From 6ml to 100ml the parameter increments in 1ml steps (Standard resolution).
From 100ml to 200ml the parameter increments in 5ml steps (Coarse resolution).
TTV button: Selects TTV on/off panel
Two point O
2
calibration button: Activates calibrates O
2
system
Ventilation Off button: Selects ventilation off mode
Version button: Activates version information panel