Chapter 2 Using basic features
docs.smarttech.com/kb/171875 23
Using the pens and erasers
The display includes a black pen, a red pen, and two erasers. You can use the pens to write and draw in
digital ink on the display, and you can use the erasers—or your palm or fist—to erase digital ink.
The display has magnetic holders for the pens and erasers at the bottom of the display’s frame. Return
the pens and erasers to their holders when you’re done with them.
Caution
When you return a pen to the magnetic holder, make sure it’s centered in its holder to keep it from
falling and being damaged.
Writing and drawing in digital ink
Several people can write or draw on the screen at the same time. Each pen writes and draws in its own
color. The Pen ID
™
feature lets you temporarily assign different colors, thicknesses, and other properties
to each pen.
Important
Use only pens designed for SMARTBoard QX Pro series interactive displays (see
smarttech.com/kb/171230).
Note
When a pen is introduced to a display for the first time, it may take a few moments for the pen to pair
with the display.
To write or draw in digital ink
1. Pick up one of the display’s pens.
2. Write or draw in digital ink on the screen.
Tip
l
To learn how to change a pen’s default behavior, see
Changing a pen’s color, thickness, and
other properties
on page25.
l
Freeze the screen before writing or drawing over a video, an animation, or other moving images
(see
Freezing the screen
on page30).
To Next Page
Loading...
Need help?
General
