Chapter 2 Using basic features
docs.smarttech.com/kb/171875 25
l
Closing (hiding) the toolbar
l
Using presentation tools
Changing a pen’s color, thickness, and other properties
You can change a pen’s color, thickness, and other properties temporarily using the SMARTInk dynamic
(floating) toolbar when you’re viewing a connected computer’s input.
See
Using the SMART Ink dynamic (floating) toolbar
on the previous page.
Note
When working in iQ, the pen’s color, thickness, and other properties return to their default settings after
the pen is returned to the display’s magnetic pen well. This may take up to 30 seconds.
Erasing digital ink
Caution
When you return an eraser to a magnetic holder, make sure it’s centered in its holder to keep it from
falling and being damaged.
You can erase digital ink from the screen using an eraser or your palm or fist:
Move a pen’s eraser over digital ink to erase.
OR
Move the eraser over digital ink to erase.
OR
Move your palm or fist over digital ink to erase.
To Next Page
Loading...
Need help?
General
