12 smartmeter T20
Any use other than the intended use is improper and can result in material
damage or even bodily injury.
We assume no liability for any damages or injuries resulting from improper
use of the device.
3.2 Hazards from Improper Use
Make sure the meter and especially the power plug are
always kept dry.
Do not expose the meter to temperatures below 0 °C.
Connect the power plug only to 100-240 V AC,
50/60 Hz.
Charge the meter only with the supplied power plug.
During electrical storms, disconnect the meter from the
aerial and from the power supply.
Do not put heavy objects onto the meter.
Avoid mechanical influences that can damage e.g. the
LCD display or the housing of the meter.
Do not bend or crimp the cables.
Do not start to use the meter if you can see signs of
damage or if you can hear loose parts inside the device.
Damages on the housing of the power plug or an im-
properly repaired power plug can expose the user to
mains voltage.
Do not open the supplied power plug.
Have the power plug repaired by qualified personnel
only.
Taking the device from cold into warm temperatures
can lead to condensation forming inside the device.
To Next Page
Loading...