Smart Electronic SMARTMETER T20 - General Safety Precautions; Intended Use of the Meter

General Safety Notes
smartmeter T20 11
2.2.2 Top View
No.
Description
1
Aerial port
2
Analogue audio input (mono)
3
Analogue video input (composite video)
2.2.3 Bottom View
No.
Description
1
Low-voltage socket (for power plug)
2
Switch for battery
3
USB port for external data storage devices
2.2.4 Rear View
No.
Description
1
Battery compartment
The above figures show the smartmeter T20 without the black part cover-
ing the top of the device.
2.3 Guarantee
The digital meter smartmeter T20 of smart electronic GmbH comes with a
guarantee in accordance with legal requirements as applicable at the time
of the purchase.
3 General Safety Notes
3.1 Intended Use
The meter is intended for measuring signals on digital aerials and aerial
systems. It is intended for this purpose only and must not be used for oth-
er purposes. Please use the accessories only for the purposes described
in this user manual.