Smart Electronic SMARTMETER T20 - Troubleshooting Common Issues

Troubleshooting
smartmeter T20 35
16 Troubleshooting
Symptom
Possible Cause
Suggestion
Meter cannot be switched
on
Battery is empty.
Charge the battery.
Bad picture quality
Aerial is not aligned cor-
rectly.
Aerial is defective.
Align the aerial.
Replace the aerial.
No or weak signal
Check all cable connec-
tions.
Align the aerial.
No tone Tone is switched off
(mute).
Enter the
Settings
menu
and switch the tone back
on.
Meter does not recognise
USB data storage device
Switch the meter off and
back on.
If the troubleshooting suggestions do not help to correct a malfunction,
please contact your specialist dealer.

You can find an FAQ-list with updated troubleshooting
suggestions in the Support section on our website at
www.smart-electronic.de.