SMART 450 - Page 55

To take a series of screen captures
1. Open a SMARTDocumentCamera window.
2.
Press Capture with Time-Lapse on the SMARTDocumentCamera window menu bar, and
then select a period of time. (For example, if you want to take a screen capture every 15
seconds, select 15 Seconds.)
3. When you’re done, press to stop recording.
N O T E
The display appears in the bottom left corner of your SMARTNotebook page. It
displays the time that has lapsed since the last screen capture and the number of screen
captures taken.
To use a microscope
1. Connect your document camera to a microscope. See Connecting your document camera to
externaldevices on page 16.
2. Open a SMARTDocumentCamera window.
3.
Press Additional Settings on the SMARTDocumentCamera window menu bar, and then
select StartMicroscopeMode.
N O T E
The Additional Settings button doesn’t appear if you’re using a
SMARTDocumentCamera 230 with SMARTNotebook software.
4.
Press Additional Settings , and then select StopMicroscopeMode when you’re done.
C H A P T E R 5
Using your SMARTDocumentCamera with SMART Notebook software
49