SMART 450 - Page 60

3.
Press the and buttons on the control panel to toggle between functions.
4.
Press the button on the control panel to make a selection.
5.
Press the button on the control panel to close the menu.
Repeat steps 2–4 as needed.
To play a slide show
1. Connect your document camera directly to a projector or another display. For connection
information, see page 13
2.
Set the USB switch to . The USB indicator on the control panel is lit.
OR
Insert an SD/SDHC card or a USB drive in the appropriate receptacle.
3.
Press the buttonon the control panel.
Thumbnail images from the memory source are displayed.
4.
Press the button on the control panel.
5.
Press the button on the control panel twice to start the slide show.
6.
Press the button on the control panel to stop the slide show or to return to the thumbnails
view.
C H A P T E R 6
Using your SMARTDocumentCamera in Playback mode
54