SMART EQ forfour 2018 - Page 133

Authorising another mobile phone
Bluetooth
®
must be enabled on the smart
Media-System.
X
Select Settings > Manage devices.
The list of visible mobile phones appears.
X
Select the mobile phone from the list.
X
Enter the security code on the mobile
phone or accept access confirmation (see
manufacturer's operating instructions).
The Bluetooth
®
connection is established.
The Bluetooth
®
connection will be estab-
lished automatically in future.
Downloading telephone data automati-
cally
X
Select Settings > Automatically down‐
load phone data.
X
If necessary, accept the access confirma-
tion on the mobile phone.
During connection, up to 1,000 contacts
are automatically transferred to the
smart Media-System.
Connecting another authorised mobile
phone
X
Select Settings > Manage devices.
X
Select the mobile phone.
The current Bluetooth
®
connection is ter-
minated. The desired mobile phone is
connected to the smart Media-System
instead.
Removing a mobile phone from the list
X
Select Settings > Manage devices.
X
Select W > Delete device(s).
X
Select the mobile phone.
X
Select Delete.
Terminating a Bluetooth
®
connection
X
Select Settings > Manage devices.
X
Select W > Disconnect all devices.
X
Select the mobile phone.
If the mobile phone leaves the Bluetooth
®
receiver range, the connection is automati-
cally terminated.
Telephone operation
Useful information
The following conditions must be fulfilled
in order to make a 999 or 112 emergency
call:
R
a valid and operational SIM card is inser-
ted in the mobile phone
R
a mobile phone network is available
Calling a contact from the phone book
X
Select Phonebook.
X
Select the contact.
X
Select the contact's telephone number.
If the phone book contains multiple con-
tacts, they can be called up using Find.
Dialling a phone number
X
Select Dial a number.
X
Enter a number on the keypad.
X
Select Call.
Calling a contact from the call log
X
Select Call logs.
X
Select an entry from the list.
The call log can be sorted according to calls
made, calls received and missed calls using
the corresponding receiver icon.
Accepting and rejecting an incoming
call
If a call is incoming, the following informa-
tion will appear on the display:
R
name of caller, if already in the phone
book
R
number of caller, if name of caller is not
already in the phone book
R
Private number, if the caller has the
"Hide caller ID" function switched on
X
To accept the call, select Pick up.
X
To reject the call, select Refuse.
The call will be forwarded to voicemail.
Using a mobile phone
131
>> Using the smart Media-System.
Z