SMART EQ forfour 2018 - Page 134

Holding and continuing a call
X
Select W > Put on hold.
X
To continue the call, select Resume.
Transferring a call to the mobile phone
X
Select W > Handset.
Ending a call
X
Select End call.
Using the smartphone screen applica-
tion
Selecting settings for the smartphone
screen
Selecting the preferred smartphone
screen application
If mobile phones support Android Auto™ as
well as MirrorLink
®
, the preferred applica-
tion can be selected when a mobile phone is
connected.
X
Select System > Smartphone Screen >
Smartphone Screen application pref‐
erence.
X
Select Android Auto™ or MirrorLink
®
.
Selecting settings to start Android Auto™
and MirrorLink
®
X
Select System > Smartphone Screen >
Android Auto™ Settings.
or
X
Select System > Smartphone Screen >
MirrorLink™ Settings.
X
Start smartphone screen application
Select one of the following settings:
R
Ask me at each launch
If the smartphone has been connected
with the smart Media-System, you will
be asked whether the preferred smart-
phone screen application should be
started.
R
Yes
If the smartphone has been connected
with the smart Media-System, the pre-
ferred smartphone screen application
will be started automatically.
R
No
If the smartphone has been connected
with the smart Media-System, a smart-
phone screen application will not be
started.
Using MirrorLink
®
Useful information
MirrorLink
®
is a standard for the connec-
tion between the smart Media-System and a
mobile phone. With MirrorLink
®
, the con-
tent of the display on your mobile phone
can be displayed in the smart Media-Sys-
tem.
MirrorLink
®
is available for mobile phones
with the Android™ operating system.
Further information: http://
www.smart.com/connect.
To use MirrorLink
®
, observe the following
requirements:
R
the mobile phone must support Mirror-
Link
®
version 1.1 and above
R
the mobile phone is switched on
R
a MirrorLink
®
certified app must be
installed on the mobile phone
R
the GPS connection must be activated on
the mobile phone
R
the time is set on the smart Media-Sys-
tem
Setting up a connection
X
Activate MirrorLink
®
on your mobile
phone (see the manufacturer's operating
instructions).
X
Connect a mobile phone with a connect-
ing cable to the USB socket in the centre
console.
X
Select Yes.
Apps which have been certified for Mir-
rorLink
®
will be shown in the smart
Media-System display.
132
Using a mobile phone
>> Using the smart Media-System.