unable to prevent the stored speed from being
exceeded on
downhill gradients. In this case,
the stored speed flashes in the display and a
warning tone sounds. Brake yourself, if nec-
essary, to avoid exceeding the speed.
Important safety notes
If you fail to adapt your driving style, the
limiter can neither reduce the risk of an
accident nor
override the laws of physics. The
limiter cannot take into account road,
weather or traffic conditions. The limiter is
only an aid. You are responsible for the dis-
tance to the vehicle in front, for vehicle
speed, for braking in good time, and for stay-
ing in lane.
If there is a change of drivers, advise the new
driver of the speed stored.
Limiter buttons
:
Activates/deactivates the limiter
;
Stores, increases or reduces the current
speed
=
Calls up the last speed stored
?
Cancels the limiter
Activating the limiter
The limiter must be activated before the
speed limiter can be used.
X
Press (LIM) switch :.
The limiter is activated.
The È symbol appears
in the multifunc-
tion display.
i
When you switch off the engine, the lim-
iter remains activated and the last speed
stored is cleared.
Storing the speed
When the limiter is active, you can store any
speed starting from 30 km/h.
You
can save the current driving speed or you
can set any desired speed while the vehicle is
stationary.
Saving the current driving speed
X
Accelerate the vehicle to the desired
speed.
X
Press switch ; (®) and release it.
The limiter is activated. The stored speed
appears beside the È icon in the mul-
tifunction display.
Setting a speed while the vehicle is station-
ary
X
Press switch ; (®) and release it.
The limiter is activated. The stored speed
appears beside the È icon in the mul-
tifunction display.
Calling up the last speed stored
X
Press button = (°) and release it.
The limiter is activated.
i
The last
speed stored is cleared when you
switch off the engine.
Increasing or decreasing the speed
In order to be able to increase or decrease the
speed, a
speed must already have been stored.
R
®: increases the speed
R
−: decreases the speed
X
Press switch ; (®) or (−) repeatedly
until the desired speed is reached. The
speed is then gradually increased or
decreased.
or
X
Press and hold switch ; (®)
or
(−) until
the desired speed is reached. The speed
will be increased or reduced in 10 km/h
increments.
X
Release the switch.
The new speed is stored.
Driving systems
115
>> Driving and parking.
Z
To Next Page
Loading...
Need help?
General
