SMART fortwo 2015 - Setting

R
Display/switch brightness submenu
(Y page 129
)
-
Adjusting the instrument cluster light-
ing
R
Digital speedometer
submenu, see
(Y page 129)
-
Shows and sets the digital speedometer
R
Units of distance submenu (Y page 129)
-
Setting the units of distance
R
Units of temperature submenu
(Y page 130)
-
Setting the units of temperature
X
To leave the submenu: press the 9
or : button on the steering wheel to
select
the back
function and press a on
the steering wheel to confirm.
The display shows the Settings menu.
i
If you press and hold 9 or :, you
change directly to the back function.
Adjusting the instrument cluster lighting
Instrument
cluster
lighting includes illumi-
nation of the instrument cluster, the addi-
tional instruments on the dashboard, the dis-
plays and the controls.
You can set the brightness of the instrument
cluster to different levels with the Display/
switch brightness function.
X
Press the 9 or :
button on the steer-
ing wheel to select the Settings menu and
press a on the steering wheel to con-
firm.
X
Press the 9
or :
button to select the
Display submenu and confirm with a.
X
Press the 9 or : button to select
Display/switch brightness
and press the
a button to confirm.
X
Press the 9 or : button to set the
brightness level. Level 1 corresponds to
dimmed instrument lighting and level 5 to
bright instrument lighting.
With the
selection during night-time driv-
ing, the instrument cluster brightness
level is set at the same time.
X
Press the a button to confirm the set-
ting.
The instrument
lighting is set and the dis-
play shows the Display submenu.
Digital speedometer submenu
In the Digital speedometer submenu you
have the following options:
R
showing/hiding the digital speedometer
R
setting the unit for speed in the digital
speedometer
X
To call up the submenu: press the 9
or : button on the steering wheel to
select the Settings
menu and press a on
the steering wheel to confirm.
X
Press the 9 or :
button to select the
Display submenu and confirm with a.
X
Press the 9 or :
button to select the
Digital speedometer submenu and con-
firm with a.
X
To show/hide the digital speedometer:
press the 9
or : button to select the
On function.
X
Activate or deactivate the On function by
pressing the a button.
When the function is highlighted, it is
activated
and
the display shows the digital
speedometer (Y page 124).
X
To set the unit of speed: press the 9
or : button
to select Unit and press the
a button to confirm.
X
Press the 9
or :
button to select the
unit of speed km/h or mph and confirm with
a.
The display shows the Digital speedome‐
ter submenu.
X
To leave the submenu: press the 9
or : button to select the back function
and confirm with a.
The display shows the Display submenu.
i
If you press and hold 9 or :, you
change directly to the back function.
Setting the unit of measurement for dis-
tance
If you change the unit of measurement for
distance, the values in the:
R
trip
computer
"From start" or "From reset"
(Y page 125)
R
eco score from start (Y page 126)
R
fuel consumption (Y page 126)
menus are also reset automatically.
Menus and submenus
129
>> On-board computer and displays.
Z