SMART fortwo 2015 User Manual

You can only set the unit of measurement for
distance when the vehicle is stationary.
X
Press the 9 or :
button on the steer-
ing wheel to select the Settings menu and
press a on the steering wheel to con-
firm.
X
Press the 9
or :
button to select the
Display submenu and confirm with a.
X
Press the 9 or : button to select
Units of distance and press the a
button to confirm.
X
Press the 9 or : button to select
Kilometres or Miles as the unit of meas-
urement for distance and press a to
confirm.
The display shows the Display submenu.
The selected unit of measurement for dis-
tance applies as the basis for:
R
the trip computer
R
the service display
R
the fuel consumption display
R
the total distance recorder and the trip
meter display
R
the
speed
display for cruise control and the
limiter
Setting the temperature unit
You can switch the display of the outside tem-
perature and the coolant temperature between
† and ‡.
X
Press the 9
or :
button on the steer-
ing wheel to select the Settings menu and
press a on the steering wheel to con-
firm.
X
Press the 9
or :
button to select the
Display submenu and confirm with a.
X
Press the 9 or : button to select
Units of
temperature and press the a
button to confirm.
X
Press the 9 or :
button to select the
unit of temperature °C or °F and confirm
with a.
The display shows the Display submenu.
Ambient lighting submenu
Introduction
In the Ambient lighting submenu you have
the following options:
R
switching the ambient lighting on/off
R
setting the brightness of the ambient
lighting to different levels
X
To leave the submenu: press the 9
or : button on the steering wheel to
select the back
function and press a on
the steering wheel to confirm.
The display shows the Settings menu.
i
If you press and hold 9 or :, you
change directly to the back function.
Switching the ambient lighting on/off
X
Press the 9 or :
button on the steer-
ing wheel to select the Settings menu and
press a on the steering wheel to con-
firm.
X
Press the 9
or :
button to select the
Ambient lighting submenu and confirm by
pressing the a button.
X
Press the 9
or :
button to select the
On function.
X
Activate or deactivate the On function by
pressing the a button.
When the function is highlighted it is
activated and the ambient lighting is
switched on.
Setting the brightness
You can set the brightness of the ambient
lighting to different levels.
X
Press the 9
or : button on the steer-
ing wheel to select the Settings menu and
press a on the steering wheel to con-
firm.
X
Press the 9
or :
button to select the
Ambient lighting submenu and confirm by
pressing the a button.
You will see the selected setting.
X
Press the 9 or : button to select
Brightness and press the a button to
confirm.
X
Press the 9 or : button to set the
brightness level. Level 1 corresponds to
130
Menus and submenus
>> On-board computer and displays.

SMART fortwo 2015 Specifications

General

Brand	SMART
Model	fortwo 2015
Category	Automobile
Language	English