SMART fortwo 2015 - Monochrome

On-board computer with a monochrome
display
Operating the on-board computer
:
Monochrome display
;
Buttons on the multifunction lever
X
To activate the on-board computer: unlock
the vehicle and open a door.
If you
do not subsequently lock the door, the
on-board computer will remain active for
approximately 15 minutes without any fur-
ther activity.
or
X
Turn the key to position 1 in the ignition
lock.
You can control the display and the settings
in
the
on-board computer using buttons ; on
the multifunction lever.
Buttons ; on the multifunction lever
´
Press briefly:
R
To scroll forward at menu level
R
To gradually increase the value
in the sub-menus
Press and hold:
R
To switch directly to the trip
meter at menu level
R
To quickly increase the value in
the sub-menus
a
Press briefly:
R
To confirm the setting in the
sub-menu
Press and hold:
R
To reset the value at menu level
or call up the sub-menu
Monochrome display
Vehicles with manual transmission
:
Time (Y page 124)
;
Transmission display
u
Gearshift recommendation
(Y page 99)
¿ Standard display
S Transmission malfunction
(Y page 133)
=
¤
Lane Keeping Assist indicator lamp
(Y
page 118)
?
Outside temperature display
(Y page 120)
A
Trip meter
(Y page 123)
Current fuel consumption (Y page 124)
Service display (Y page 175)
B
Restarts the tyre pressure monitor
(Y page 205)
122
Displays and operation
>> On-board computer and displays.