SMART fortwo 2015 User Manual

C
6 Fuel level (Y page 121
)
D
eco score display (
Y page 109)
Reserve fuel display (Y page 121
)
E
b
Brake lamp failure warning lamp
(Y page 132)
F
Total distance recorder
G
V Cruise control (Y page 113)
È
Limiter
Vehicles with automatic transmission
:
Time (Y page 124)
;
Drive program
(Y page 100)
=
u
Gearshift recommendation
(Y page 102)
?
Transmission display
h Standard display or
= Gear indicator (manual mode)
S Transmission malfunction
(Y page 104)
A
¤
Lane Keeping Assist indicator lamp
(
Y page 118)
B
Outside temperature display
(Y page 120)
C
Trip meter
(Y page 123)
Current fuel consumption (Y page 124)
Service display (Y page 175)
D
Restarts the tyre pressure monitor
(Y page 205)
E
6 Fuel level (Y page 121)
F
eco score display (Y page 109)
Reserve fuel display (Y page 121
)
G
b
Brake lamp failure warning lamp
(Y page 132)
H
Total distance recorder
I
V Cruise control (Y page 113)
È Limiter
Menus and multi-displays
Overview
The arrangement of the menus and displays
can be envisaged as a circle.
X
To scroll: repeatedly press the ´
button
on the multifunction lever.
The menu functions/displays are shown one
after the other.
i
If the ´ button is pressed and held for
approximately 3 seconds, the trip meter
appears directly on the display.
Depending on the vehicle equipment, you can
call up the following menus/displays one
after the other:
R
display and reset the trip meter
(Y page 123)
R
display the current fuel consumption
(Y page 124)
R
display the service due date (Y page 175)
R
set the time menu (Y page 124)
R
Restarting the tyre pressure monitor
(Y page 205)
Resetting values
You can reset the trip meter data and the eco
score display (Y page 109). You can only reset
the eco score if the display is showing the
current fuel consumption.
X
Repeatedly press the ´ button on the
multifunction lever
until the display shows
the trip meter data or the current fuel con-
sumption.
X
Press and hold the b button on the mul-
tifunction lever.
The trip meter value or the eco score dis-
play
flashes for approx. 3 seconds. The data
is then reset.
The count in the eco score display only
reappears once a distance of approx. 400 m
has been covered. If the ignition remains
switched off for longer than four hours, the
eco score display in the on-board computer
will be automatically reset.
X
When the value has been reset, release the
b button.
If you release the b button earlier, the
data shown will not change.
Displays and operation
123
>> On-board computer and displays.
Z

SMART fortwo 2015 Specifications

General

Brand	SMART
Model	fortwo 2015
Category	Automobile
Language	English