dimmed ambient lighting and level 5 to
bright ambient lighting.
With the selection, the ambient lighting
brightness level is set at the same time.
X
Press the a button to save the setting.
The brightness of the ambient lighting is
set and the display shows the Ambient
lighting submenu.
Language submenu
X
Press the 9 or :
button on the steer-
ing wheel to select the Settings menu and
press a on the steering wheel to con-
firm.
X
Use 9 or : to select the Language
(Language) submenu and confirm with
a.
X
Press the 9
or :
button to select the
desired language for the displays and mes-
sages and confirm with a.
X
Press the 9 or :
button on the steer-
ing wheel to select the back function and
press a on the steering wheel to con-
firm.
The display shows the Settings menu in the
selected language.
i
If you press and hold 9 or :, you
change directly to the back function.
Display messages (on-board computer with monochrome display)
Introduction
Warnings, malfunctions or additional information are shown in the monochrome display as
symbols. For certain display messages a warning tone also sounds.
Display messages with graphic symbols are simplified in the Owner's Manual and may differ
from the symbols in the display.
Please respond
in accordance with the display messages and follow the additional notes in this
Owner's Manual. The cause of a display message should be remedied as soon as possible.
Display messages (on-board computer with monochrome display)
131
>> On-board computer and displays.
Z
To Next Page
Loading...
Need help?
General
