3 | CHAPTER 1 – OVERVIEW
USB Storage Device Bracelet
The USB storage device bracelet contains the
SMART Table software as well as a PDF copy of this
guide, which you can view with Adobe® Reader. You
use the bracelet to install the software when you first
set up your SMART Table. Afterward, you can use it to
do the following:
• Install the SMART Table Toolkit on a Windows® or Mac OS computer
(see page 17)
• Install new activity packs and applications on your SMART Table (see page 39)
• Update the SMART Table software (see page 45)
NOTES
• The USB storage device bracelet can store up to 2 GB of files.
• If you lose your SMART USB storage device bracelet, you can order a new
one from your reseller, or use another generic USB storage device.
Power Cable
The power cable provided with your
SMART Table is specific to your region and
should work with outlets in your school.
Connect the power cable to the SMART Table
following the instructions in the SMART Table 230i Installation Instructions
(document 141081
).
If you extend the power cable across the floor, properly mark it to prevent a trip
hazard.
Keys
The keys allow you to lock the cabinet to prevent access to the
computer and projector. Store the keys in a convenient but safe location
when not in use. If you lose your keys, contact SMART Technical
Support (seeTechnical Support on page 57) for a replacement.
Installation Instructions
Follow the SMART Table 230i Installation Instructions (document 141081) to unpack
and set up your SMART Table.
To Next Page
Loading...
