SMART Table 230i - Configuring SMART Sync Student Software

43 | CHAPTER 6 – SMART TABLE AND SMART SYNC SOFTWARE
To setup a
wireless network
Refer to the documentation provided with your wireless network device to set up and
configure a Wi-Fi network for your SMART Sync system.
NOTES
• You can configure the SMART Table’s wireless network settings using
Windows Vista Control Panel. Use the SMART Keyboard or connect a USB
keyboard to enter network settings.
• Restart your SMART Table after setting up the network so that SMART Sync
software can detect the network.
•The SMART Sync 2009 User’s Guide (document 131740
) provided with your
SMART Sync software has information about firewall configuration.
Configuring SMART Sync Student Software
The SMART Sync Student software on your SMART Table is configured so you won’t
need to make many changes to the configuration.
TIP
Install SMART Sync Teacher on your teacher’s computer first so that you can
detect the Teacher installations on your network when running the SMART Sync
Student Configuration Tool.
To configure SMART Sync
Student software
1. Select Start > All Programs > SMART Technologies > SMART Sync > SMART
Sync Student Configuration Tool 2009.
The SMART Sync Student Configuration Tool dialog box appears.
2. Click Next.
3. Select Hidden from students, and then click Next.
4. Select Automatically connects with this Teacher ID.
5. Type the ID in the box below the option, and then click Next.
If the Teacher ID isn’t visible on your network, a dialog box appears asking you to
continue or troubleshoot the problem, click Continue Configuration.
The Options dialog box appears.
6. Select the student’s language in the Language drop-down list, and then
click Next.
7. Select Anonymous, and then click Next.
8. Select My Documents folder, and then click Next.
9. Select No security, and then click Next.
10. Click Finish.