Chapter 7
Maintaining Your
SMART Table
Your SMART Table requires minimal maintenance. This chapter describes the five
most common maintenance tasks:
• Updating the Software on page 45
• Orienting the Surface on page 47
• Cleaning Your SMART Table on page 48
• Replacing the Projector Lamp on page 48
• Aligning the Projector on page 48
Updating the Software
The SMART Table Toolkit includes SMART Product Update (SPU). SPU allows you to
check the SMART website for updates to the SMART Table software. You can
download the software updates to your USB storage device bracelet or to another
USB storage device. Refer to Uploading the SMART Table Toolkit Installer to a USB
Storage Device on page 15.
NOTE
You must copy the SMART Table Toolkit files to the root folder on the USB
storage device.
Once the files are on the USB storage device bracelet, you can install the software
updates on your SMART Table by completing the following procedures.
IMPORTANT
After updating, use the SMART Table Toolkit included in the update to customize
your applications. Do not use an earlier version of the toolkit.
To Next Page
Loading...
