46 | CHAPTER 7 – MAINTAINING YOUR SMART TABLE
To install updates on
your SMART Table
1. Turn on your SMART Table (see Turning On Your SMART Table on page 5).
The SMART Table Activities menu appears.
2. Connect the USB storage device bracelet to your SMART Table.
If toolkit files aren’t on the USB storage device, a message appears, asking
whether you want to install the update.
3. Press OK.
A windows appears showing the installation progress, and then after a delay, a
language selection page appears.
4. Select the language you want the user Teacher mode interface to appear in, and
then press OK.
A License Agreement page appears.
5. Press Agree four times.
A message appears indicating that the update is complete and requests that you
remove and reconnect the USB storage device.
6. Disconnect, and then reconnect the USB storage device bracelet.
A message appears saying that the SMART Table Toolkit allows you to download
and create activities.
7. Press OK.
8. Press Get Toolkit.
A Copying SMART Table Toolkit message appears, and then Copy Complete
appears.
9. Press OK.
10. Disconnect the USB storage device.
To update the SMART
Table Toolkit on your
computer
Refer to Installing the SMART Table Toolkit on page 17 for instructions to install the
updates you’ve copied to the USB storage device.
To select the default
application
1. Connect the USB storage device bracelet to your SMART Table.
The menu changes from Student mode to Teacher mode.
2. Press Choose Activities.
3. Press the Table tab.
A list of all .tableApplication files on the table appears.
TIP
Press to rotate the list 180°.
To Next Page
Loading...
